commit 14db7a80f30e35ee0136bdfa2dcee693291850f2 Author: Yuri Zamyatin Date: Sun Apr 20 21:36:44 2025 +0000 init diff --git a/README.md b/README.md new file mode 100644 index 0000000..5a6e085 --- /dev/null +++ b/README.md @@ -0,0 +1,3 @@ +# Workspace + +My scripts and configuration. See [blog post](https://yrz.am/posts/workspace/). diff --git a/arch-platform/README.md b/arch-platform/README.md new file mode 100644 index 0000000..6da7646 --- /dev/null +++ b/arch-platform/README.md @@ -0,0 +1,118 @@ +# arch-platform + +## Introduction + +This document describes disk partitioning and installation of the minimal Arch Linux system with LVM-in-LUKS, systemd-boot and network capabilities. + +Created at 2022-05-22T23:58:54Z and not so well maintained as I rarely use it. + +## Create installation medium + +1. [Download](https://archlinux.org/download/) via torrent +2. Verify: `sha256sum | grep ` +3. Find usb device name: `lsblk` +4. Create installation medium: `dd if= of=/dev/ bs=1MiB` + +## Install + +1. Boot to USB image +2. On loader screen press `e`, append `nomodeset` the at end of `linux` commans +3. Partitioning: `parted ` (see name via `lsblk`) + +``` +mklabel gpt +mkpart ESP fat32 1MiB 513MiB +set 1 boot on +mkpart primary ext4 514MiB 100% +quit +``` + +4. Encrypt & open: + +```bash +cryptsetup luksFormat p2 +cryptsetup luksOpen p2 p2_crypt +``` + +5. Create volumes: + +```bash +pvcreate /dev/mapper/p2_crypt +vgcreate main /dev/mapper/p2_crypt +lvcreate -L G main -n swap +lvcreate -L G main -n root +lvcreate -l 100%FREE main -n home +``` + +6. Create FS: + +```bash +mkfs.ext4 /dev/mapper/main-root +mkfs.ext4 /dev/mapper/main-home +mkswap /dev/mapper/main-swap +mkfs.fat -F32 /dev/p1 +``` + +7. Mount: + +```bash +mount /dev/mapper/main-root /mnt +mkdir /mnt/home /mnt/boot +mount /dev/mapper/main-home /mnt/home +mount /dev/nvme0n1p1 /mnt/boot +swapon /dev/mapper/main-swap +``` + +8. Wifi setup (if needed) + +```bash +iwctl device list +iwctl station [device] connect [network_name] +``` + +9. Update keyring (iso may be too old): `pacman -Sy archlinux-keyring` +10. Install (for wifi you also need `networkmanager`): + +```bash +pacstrap -i /mnt base linux linux-firmware intel-ucode lvm2 sudo vim polkit +``` + +11. Disks: `genfstab -U /mnt >> /mnt/etc/fstab` +12. Change root: `arch-chroot /mnt` +13. Add loader hooks: `vim /etc/mkinitcpio.conf`, set + +```conf +HOOKS=(base udev autodetect microcode keyboard keymap modconf block encrypt lvm2 filesystems fsck)` +``` + +14. Make initrams: `mkinitcpio -p linux` +15. Install bootloader: `bootctl install --path=/boot` +16. Save disk UUID: `cryptsetup luksUUID /dev/p2 > /boot/loader/entries/arch.conf` +17. Make boot config: `vim /boot/loader/entries/arch.conf` + +```conf +title Arch +linux /vmlinuz-linux +initrd /initramfs-linux.img +options quiet loglevel=3 cryptdevice=UUID=[uuid]:[disk_name]p2_crypt root=/dev/mapper/main-root rw resume=/dev/mapper/main-swap +``` + +18. Make generic boot config: `vim /boot/loader/loader.conf`, set `default arch` +19. Create sudo group: `groupadd -g 1000 sudo` +20. Grant privileges: `visudo`, uncomment or add line `%sudo ALL=(ALL:ALL) ALL` +21. Add user + +```bash +groupadd -g 2000 +useradd -m --groups sudo --gid 2000 --uid 2000 +passwd +``` + +22. `exit`, `reboot` into real system +23. login, `sudo su` +24. Uncomment locale in `/etc/locale.gen`, run `locale-gen` +25. `echo "" > /etc/hostname` +26. `systemctl enable NetworkManager --now` +27. Enable and sync time: `systemctl enable systemd-timesyncd --now` +28. Get tz from `tzselect`, set via `timedatectl set-timezone [tz]` +29. Update hwclock: `hwclock -w --utc` diff --git a/arch-root/_install/custom/_laptop.sh.yrz.am/tlp.conf b/arch-root/_install/custom/_laptop.sh.yrz.am/tlp.conf new file mode 100644 index 0000000..62f04b4 --- /dev/null +++ b/arch-root/_install/custom/_laptop.sh.yrz.am/tlp.conf @@ -0,0 +1,580 @@ +# ------------------------------------------------------------------------------ +# /etc/tlp.conf - TLP user configuration (version 1.7.0) +# See full explanation: https://linrunner.de/tlp/settings +# +# Copyright (c) 2024 Thomas Koch and others. +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Settings are read in the following order: +# +# 1. Intrinsic defaults +# 2. /etc/tlp.d/*.conf - Drop-in customization snippets +# 3. /etc/tlp.conf - User configuration (this file) +# +# Notes: +# - In case of identical parameters, the last occurence has precedence +# - This also means, parameters enabled here will override anything else +# - However you may append values to a parameter already defined as intrinsic +# default or in a previously read file: use PARAMETER+="add values" +# - IMPORTANT: all parameters here are disabled; remove the leading '#' if you +# like to enable a feature without default or have a value different from the +# default +# - Default *: intrinsic default that is effective when the parameter is missing +# or disabled by a leading '#'; use PARAM="" to disable an intrinsic default +# - Default : do nothing or use kernel/hardware defaults +# - IMPORTANT: parameters must always be specified pairwise i.e. for +# both AC and BAT. Omitting one of the two makes the set value effective for +# both power sources, since a change only occurs when different values are +# defined. +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving + +# Set to 0 to disable, 1 to enable TLP. +# Default: 1 + +#TLP_ENABLE=1 + +# Control how warnings about invalid settings are issued: +# 0=disabled, +# 1=background tasks (boot, resume, change of power source) report to syslog, +# 2=shell commands report to the terminal (stderr), +# 3=combination of 1 and 2 +# Default: 3 + +#TLP_WARN_LEVEL=3 + +# Colorize error, warning, notice and success messages. Colors are specified +# with ANSI codes: +# 1=bold black, 90=grey, 91=red, 92=green, 93=yellow, 94=blue, 95=magenta, +# 96=cyan, 97=white. +# Other colors are possible, refer to: +# https://en.wikipedia.org/wiki/ANSI_escape_code#3-bit_and_4-bit +# Colors must be specified in the order " ". +# By default, errors are shown in red, warnings in yellow, notices in bold +# and success in green. +# Default: "91 93 1 92" + +#TLP_MSG_COLORS="91 93 1 92" + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +# Default: + +#TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Note: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +# Default: 0 + +#TLP_PERSISTENT_DEFAULT=0 + +# Power supply classes to ignore when determining operation mode: AC, USB, BAT. +# Separate multiple classes with spaces. +# Note: try on laptops where operation mode AC/BAT is incorrectly detected. +# Default: + +#TLP_PS_IGNORE="BAT" + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +# Default: 0 (AC), 2 (BAT) + +#DISK_IDLE_SECS_ON_AC=0 +#DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +# Default: 15 (AC), 60 (BAT) + +#MAX_LOST_WORK_SECS_ON_AC=15 +#MAX_LOST_WORK_SECS_ON_BAT=60 + +# Select a CPU scaling driver operation mode. +# Intel CPU with intel_pstate driver: +# active, passive. +# AMD Zen 2 or newer CPU with amd-pstate driver as of kernel 6.3/6.4(*): +# active, passive, guided(*). +# Default: +#CPU_DRIVER_OPMODE_ON_AC=active +#CPU_DRIVER_OPMODE_ON_BAT=active + +# Select a CPU frequency scaling governor. +# Intel CPU with intel_pstate driver or +# AMD CPU with amd-pstate driver in active mode ('amd-pstate-epp'): +# performance, powersave(*). +# Intel CPU with intel_pstate driver in passive mode ('intel_cpufreq') or +# AMD CPU with amd-pstate driver in passive or guided mode ('amd-pstate') or +# Intel, AMD and other CPU brands with acpi-cpufreq driver: +# conservative, ondemand(*), userspace, powersave, performance, schedutil(*). +# Use tlp-stat -p to show the active driver and available governors. +# Important: +# Governors marked (*) above are power efficient for *almost all* workloads +# and therefore kernel and most distributions have chosen them as defaults. +# You should have done your research about advantages/disadvantages *before* +# changing the governor. +# Default: + +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +# Notes: +# - Min/max frequencies must always be specified for both AC *and* BAT +# - Not recommended for use with the intel_pstate driver, use +# CPU_MIN/MAX_PERF_ON_AC/BAT below instead +# Default: + +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set CPU energy/performance policies EPP and EPB: +# performance, balance_performance, default, balance_power, power. +# Values are given in order of increasing power saving. +# Requires: +# * Intel CPU +# EPP: Intel Core i 6th gen. or newer CPU with intel_pstate driver +# EPB: Intel Core i 2nd gen. or newer CPU with intel_pstate driver +# EPP and EPB are mutually exclusive: when EPP is available, Intel CPUs +# will not honor EPB. Only the matching feature will be applied by TLP. +# * AMD Zen 2 or newer CPU +# EPP: amd-pstate driver in active mode ('amd-pstate-epp') as of kernel 6.3 +# Default: balance_performance (AC), balance_power (BAT) + +#CPU_ENERGY_PERF_POLICY_ON_AC=balance_performance +CPU_ENERGY_PERF_POLICY_ON_BAT=power + +# Set Intel CPU P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires Intel Core i 2nd gen. or newer CPU with intel_pstate driver. +# Default: + +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" (Intel) or "turbo core" (AMD) feature: +# 0=disable, 1=allow. +# Allows to raise the maximum frequency/P-state of some cores if the +# CPU chip is not fully utilized and below it's intended thermal budget. +# Note: a value of 1 does *not* activate boosting, it just allows it. +# Default: + +#CPU_BOOST_ON_AC=1 +CPU_BOOST_ON_BAT=0 + +# Set CPU dynamic boost feature: +# 0=disable, 1=enable. +# Improve performance by increasing minimum P-state limit dynamically +# whenever a task previously waiting on I/O is selected to run. +# Requires Intel Core i 6th gen. or newer CPU: intel_pstate driver in active mode. +# Note: AMD CPUs currently have no tunable for this. +# Default: + +#CPU_HWP_DYN_BOOST_ON_AC=1 +#CPU_HWP_DYN_BOOST_ON_BAT=0 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +# Default: 0 + +#NMI_WATCHDOG=0 + +# Select platform profile: +# performance, balanced, low-power. +# Controls system operating characteristics around power/performance levels, +# thermal and fan speed. Values are given in order of increasing power saving. +# Note: check the output of tlp-stat -p to determine availability on your +# hardware and additional profiles such as: balanced-performance, quiet, cool. +# Default: + +#PLATFORM_PROFILE_ON_AC=performance +#PLATFORM_PROFILE_ON_BAT=low-power + +# System suspend mode: +# s2idle: Idle standby - a pure software, light-weight, system sleep state, +# deep: Suspend to RAM - the whole system is put into a low-power state, +# except for memory, usually resulting in higher savings than s2idle. +# CAUTION: changing suspend mode may lead to system instability and even +# data loss. As for the availability of different modes on your system, +# check the output of tlp-stat -s. If unsure, stick with the system default +# by not enabling this. +# Default: + +#MEM_SLEEP_ON_AC=s2idle +#MEM_SLEEP_ON_BAT=deep + +# Define disk devices on which the following DISK/AHCI_RUNTIME parameters act. +# Separate multiple devices with spaces. +# Devices can be specified by disk ID also (lookup with: tlp diskid). +# Default: "nvme0n1 sda" + +#DISK_DEVICES="nvme0n1 sda" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +# Default: 254 (AC), 128 (BAT) + +#DISK_APM_LEVEL_ON_AC="254 254" +#DISK_APM_LEVEL_ON_BAT="128 128" + +# Exclude disk classes from advanced power management (APM): +# sata, ata, usb, ieee1394. +# Separate multiple classes with spaces. +# CAUTION: USB and IEEE1394 disks may fail to mount or data may get corrupted +# with APM enabled. Be careful and make sure you have backups of all affected +# media before removing 'usb' or 'ieee1394' from the denylist! +# Default: "usb ieee1394" + +#DISK_APM_CLASS_DENYLIST="usb ieee1394" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +# Default: + +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select I/O scheduler for the disk devices. +# Multi queue (blk-mq) schedulers: +# mq-deadline(*), none, kyber, bfq +# Single queue schedulers: +# deadline(*), cfq, bfq, noop +# (*) recommended. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +# Notes: +# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1' +# and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0 +# - Single queue schedulers are legacy now and were removed together with +# the old block layer in kernel 5.0 +# Default: keep + +#DISK_IOSCHED="mq-deadline mq-deadline" + +# AHCI link power management (ALPM) for SATA disks: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) recommended. +# Multiple values separated with spaces are tried sequentially until success. +# Default: med_power_with_dipm (AC & BAT) + +#SATA_LINKPWR_ON_AC="med_power_with_dipm" +#SATA_LINKPWR_ON_BAT="med_power_with_dipm" + +# Exclude SATA links from AHCI link power management (ALPM). +# SATA links are specified by their host. Refer to the output of +# tlp-stat -d to determine the host; the format is "hostX". +# Separate multiple hosts with spaces. +# Default: + +#SATA_LINKPWR_DENYLIST="host1" + +# Runtime Power Management for NVMe, SATA, ATA and USB disks +# as well as SATA ports: +# on=disable, auto=enable. +# Note: SATA controllers are PCIe bus devices and handled by RUNTIME_PM further +# down. + +# Default: on (AC), auto (BAT) + +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=auto + +# Seconds of inactivity before disk is suspended. +# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated. +# Default: 15 + +#AHCI_RUNTIME_PM_TIMEOUT=15 + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +# Default: 0 + +#BAY_POWEROFF_ON_AC=0 +#BAY_POWEROFF_ON_BAT=0 + +# Optical drive device to power off +# Default: sr0 + +#BAY_DEVICE="sr0" + +# Set the min/max/turbo frequency for the Intel GPU. +# Possible values depend on your hardware. For available frequencies see +# the output of tlp-stat -g. +# Default: + +#INTEL_GPU_MIN_FREQ_ON_AC=0 +#INTEL_GPU_MIN_FREQ_ON_BAT=0 +#INTEL_GPU_MAX_FREQ_ON_AC=0 +#INTEL_GPU_MAX_FREQ_ON_BAT=0 +#INTEL_GPU_BOOST_FREQ_ON_AC=0 +#INTEL_GPU_BOOST_FREQ_ON_BAT=0 + +# AMD GPU power management. +# Performance level (DPM): auto, low, high; auto is recommended. +# Note: requires amdgpu or radeon driver. +# Default: auto + +#RADEON_DPM_PERF_LEVEL_ON_AC=auto +#RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# Dynamic power management method (DPM): balanced, battery, performance. +# Note: radeon driver only. +# Default: + +#RADEON_DPM_STATE_ON_AC=performance +#RADEON_DPM_STATE_ON_BAT=battery + +# Graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC. +# Note: radeon driver on legacy ATI hardware only (where DPM is not available). +# Default: default + +#RADEON_POWER_PROFILE_ON_AC=default +#RADEON_POWER_PROFILE_ON_BAT=default + +# Display panel adaptive backlight modulation (ABM) level: 0(off), 1..4. +# Values 1..4 control the maximum brightness reduction allowed by the ABM +# algorithm, where 1 represents the least and 4 the most power saving. +# Notes: +# - Requires AMD Vega or newer GPU with amdgpu driver as of kernel 6.9 +# - Savings are made at the expense of color balance +# Default: 0 (AC), 1 (BAT) + +#AMDGPU_ABM_LEVEL_ON_AC=0 +#AMDGPU_ABM_LEVEL_ON_BAT=3 + +# Wi-Fi power saving mode: on=enable, off=disable. +# Default: off (AC), on (BAT) + +#WIFI_PWR_ON_AC=off +#WIFI_PWR_ON_BAT=on + +# Disable Wake-on-LAN: Y/N. +# Default: Y + +#WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >= 1 enables power saving. +# Note: 1 is recommended for Linux desktop environments with PulseAudio, +# systems without PulseAudio may require 10. +# Default: 1 + +#SOUND_POWER_SAVE_ON_AC=1 +#SOUND_POWER_SAVE_ON_BAT=1 + +# Disable controller too (HDA only): Y/N. +# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated. +# Default: Y + +#SOUND_POWER_SAVE_CONTROLLER=Y + +# PCIe Active State Power Management (ASPM): +# default(*), performance, powersave, powersupersave. +# (*) keeps BIOS ASPM defaults (recommended) +# Default: + +#PCIE_ASPM_ON_AC=default +#PCIE_ASPM_ON_BAT=default + +# Runtime Power Management for PCIe bus devices: on=disable, auto=enable. +# Default: on (AC), auto (BAT) + +#RUNTIME_PM_ON_AC=on +#RUNTIME_PM_ON_BAT=auto + +# Exclude listed PCIe device adresses from Runtime PM. +# Note: this preserves the kernel driver default, to force a certain state +# use RUNTIME_PM_ENABLE/DISABLE instead. +# Separate multiple addresses with spaces. +# Use lspci to get the adresses (1st column). +# Default: + +#RUNTIME_PM_DENYLIST="11:22.3 44:55.6" + +# Exclude PCIe devices assigned to the listed drivers from Runtime PM. +# Note: this preserves the kernel driver default, to force a certain state +# use RUNTIME_PM_ENABLE/DISABLE instead. +# Separate multiple drivers with spaces. +# Default: "mei_me nouveau radeon xhci_hcd", use "" to disable completely. + +#RUNTIME_PM_DRIVER_DENYLIST="mei_me nouveau radeon xhci_hcd" + +# Permanently enable/disable Runtime PM for listed PCIe device addresses +# (independent of the power source). This has priority over all preceding +# Runtime PM settings. Separate multiple addresses with spaces. +# Use lspci to get the adresses (1st column). +# Default: + +#RUNTIME_PM_ENABLE="11:22.3" +#RUNTIME_PM_DISABLE="44:55.6" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +# Default: 1 + +#USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) and libsane-supported scanners are excluded +# automatically. +# Default: + +#USB_DENYLIST="1111:2222 3333:4444" + +# Exclude audio devices from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 1 + +#USB_EXCLUDE_AUDIO=1 + +# Exclude bluetooth devices from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 0 + +#USB_EXCLUDE_BTUSB=0 + +# Exclude phone devices from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +# Default: 0 + +#USB_EXCLUDE_PHONE=0 + +# Exclude printers from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 1 + +#USB_EXCLUDE_PRINTER=1 + +# Exclude WWAN devices from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 0 + +#USB_EXCLUDE_WWAN=0 + +# Allow USB autosuspend for listed devices even if already denylisted or +# excluded above (separate with spaces). Use lsusb to get the ids. +# Default: 0 + +#USB_ALLOWLIST="1111:2222 3333:4444" + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled. +# Default: 0 + +#RESTORE_DEVICE_STATE_ON_STARTUP=0 + +# Radio devices to disable on startup: bluetooth, nfc, wifi, wwan. +# Separate multiple devices with spaces. +# Default: + +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth nfc wifi wwan" + +# Radio devices to enable on startup: bluetooth, nfc, wifi, wwan. +# Separate multiple devices with spaces. +# Default: + +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to enable on AC: bluetooth, nfc, wifi, wwan. +# Default: + +#DEVICES_TO_ENABLE_ON_AC="bluetooth nfc wifi wwan" + +# Radio devices to disable on battery: bluetooth, nfc, wifi, wwan. +# Default: + +#DEVICES_TO_DISABLE_ON_BAT="bluetooth nfc wifi wwan" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, nfc, wifi, wwan. +# Default: + +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth nfc wifi wwan" + +# Battery Care -- Charge thresholds +# Charging starts when the charger is connected and the charge level +# is below the start threshold. Charging stops when the charge level +# is above the stop threshold. +# Required hardware: Lenovo ThinkPads and select other laptop brands +# are driven via specific plugins +# - Active plugin and support status are shown by tlp-stat -b +# - Vendor specific threshold levels are shown by tlp-stat -b, some +# laptops support only 1 (on)/ 0 (off) instead of a percentage level +# - When your hardware supports a start *and* a stop threshold, you must +# specify both, otherwise TLP will refuse to apply the single threshold +# - When your hardware supports only a stop threshold, set the start +# value to 0 +# - Older ThinkPads may require an external kernel module, refer to the +# output of tlp-stat -b +# For further explanation and vendor specific details refer to +# - https://linrunner.de/tlp/settings/battery.html +# - https://linrunner.de/tlp/settings/bc-vendors.html + +# BAT0: Primary / Main / Internal battery +# Note: also use for batteries BATC, BATT and CMB0 +# Default: + +# Battery charge level below which charging will begin. +#START_CHARGE_THRESH_BAT0=75 +# Battery charge level above which charging will stop. +#STOP_CHARGE_THRESH_BAT0=80 + +# BAT1: Secondary / Ultrabay / Slice / Replaceable battery +# Note: primary on some laptops +# Default: + +# Battery charge level below which charging will begin. +#START_CHARGE_THRESH_BAT1=75 +# Battery charge level above which charging will stop. +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +# Default: 0 + +#RESTORE_THRESHOLDS_ON_BAT=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard + +# Possible devices: bluetooth, wifi, wwan. +# Separate multiple radio devices with spaces. +# Default: (for all parameters below) + +# Radio devices to disable on connect. + +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. + +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. + +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. + +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" diff --git a/arch-root/_install/custom/desktop.sh.yrz.am.sh b/arch-root/_install/custom/desktop.sh.yrz.am.sh new file mode 100755 index 0000000..c9a76aa --- /dev/null +++ b/arch-root/_install/custom/desktop.sh.yrz.am.sh @@ -0,0 +1,4 @@ +#!/bin/bash + +# hardware +install intel-ucode nvidia diff --git a/arch-root/_install/custom/laptop.sh.yrz.am.sh b/arch-root/_install/custom/laptop.sh.yrz.am.sh new file mode 100755 index 0000000..48e1ce5 --- /dev/null +++ b/arch-root/_install/custom/laptop.sh.yrz.am.sh @@ -0,0 +1,14 @@ +#!/bin/bash + +# hardware +install intel-media-driver intel-ucode mesa sof-firmware vulkan-intel + +# brightness +install brightnessctl +file_has_line "/etc/profile" "export FEAT_BRIGHTNESS=brightnessctl" + +# power +install tlp +systemctl enable tlp --now +cp_chown custom/_laptop.sh.yrz.am/tlp.conf /etc/tlp.conf root:root 644 +systemctl restart tlp diff --git a/arch-root/_install/greetd.toml b/arch-root/_install/greetd.toml new file mode 100644 index 0000000..b359c36 --- /dev/null +++ b/arch-root/_install/greetd.toml @@ -0,0 +1,7 @@ +[terminal] +vt = 1 + +[default_session] +command = "agreety --cmd .local/bin/init" +source_profile = false +user = "greeter" diff --git a/arch-root/install.sh b/arch-root/install.sh new file mode 100755 index 0000000..fda7824 --- /dev/null +++ b/arch-root/install.sh @@ -0,0 +1,106 @@ +#!/bin/bash +set -e +cd "$(dirname "$(readlink -f -- "$0")")/_install" + +PACKAGES=( + + # system + linux base linux-firmware lvm2 sudo polkit # base + pulseaudio pulseaudio-bluetooth bluez bluez-utils networkmanager udisks2 # device management + openssh man-db restic htop # admin utils + + # generic runtime + nodejs dash + + # cli programs + vifm vim # navigation & editors + shellcheck # shell scripting + hugo miniserve neomutt translate-shell # www + gnupg pass pass-otp # crypt + jq libqalculate imagemagick # data processing + git zip # others + + # desktop env + greetd sway swaybg swayidle # basic + foot bemenu-wayland i3blocks mako libnotify # terminals, ui + wev wl-clipboard wtype slurp grim # interaction + ttf-roboto ttf-roboto-mono ttf-font-awesome # fonts + + # gui apps + imv mpv gimp # media + qutebrowser qt6-wayland # www + sqlitebrowser qt5-wayland # db + + # extensions + vim-ale vim-fugitive + + # not so good + telegram-desktop libreoffice-still + +) + +install() { + pacman -S --needed --noconfirm "$@" +} +file_has_line() { + grep -qxF "$2" "$1" || echo "$2" >> "$1" +} +cp_chown() { + cp -rf "$1" "$2" + chown "$3" "$2" -R + chmod "$4" "$2" -R +} + +[ "$(id -u)" != "0" ] && echo "ERROR: root required" >&2 && exit 1 + +pacman -Syu --noconfirm +install "${PACKAGES[@]}" + +file_has_line "/etc/profile" "umask 002" +find /etc/pam.d -type f -exec sed -i -e 's/^session optional pam_umask.so$/session optional pam_umask.so usergroups/g' {} \; + +# device management +sed -i 's/#AutoEnable=true/AutoEnable=false/' /etc/bluetooth/main.conf +systemctl enable bluetooth --now + +while read -r entity; do + # group + # user [...] + read -ra entity_parts <<< "$entity" + etype="${entity_parts[0]}" + ename="${entity_parts[1]}" + eid="${entity_parts[2]}" + [ "$etype" != "user" ] && [ "$etype" != "group" ] && echo "ERROR: bad entity type" >&2 && exit 1 + + # every user has their own primary group with id matching uid, + # so for each entry we need a usergroup + if [ -z "$(getent group "$eid")" ]; then + echo "Creating group \"$ename\", id=$eid" + groupadd --gid "$eid" "$ename" + fi + if [ "$etype" = "user" ]; then + if ! id "$eid" >/dev/null 2>&1; then + echo "Creating user \"$ename\", id=$eid" + useradd --gid "$eid" --uid "$eid" -m "$ename" + fi + usermod -aG "$(IFS=,; echo "${entity_parts[*]:3}")" "$ename" + else # group + if [[ "$ename" == share-* ]]; then + echo "Creating shared dir $ename" + mkdir -p "/home/$ename" + chgrp "$ename" -R "/home/$ename" + chmod u=rwX,g=rwX,o= -R "/home/$ename" + find "/home/$ename" -type d -print0 | xargs -0 chmod g+s + + fi + fi +done &2 + exit 1 +fi + +DEST=$(realpath "$2") +cd "$1" + +#shellcheck disable=SC2016 +find . \ + -type f \ + -not -path '*/.*' \ + -path "$3" | \ + xargs -0 -d \\n -n 1 sh -c "mkdir -p $DEST/\$(dirname \"\$1\")" sh + +#shellcheck disable=SC2016 +find . \ + -type f \ + -not -path '*/.*' \ + -path "$3" \ + -printf "$(pwd)/%P\n$DEST/%P\n" | \ + xargs -0 -d \\n -n 2 sh -c "$4" sh + + +#for rel in $(find . -type f -name *.gpg); do +# DESTFILE=$(echo $DEST/$rel | sed 's/\.[^.]*$//') + # [ -f "$DESTFILE" ] && continue +# mkdir -p "$(dirname "$DESTFILE")" +# gpg --output "$DESTFILE" --decrypt "$rel" +#done diff --git a/arch-user/bin/archiso/make.sh b/arch-user/bin/archiso/make.sh new file mode 100755 index 0000000..b3285ac --- /dev/null +++ b/arch-user/bin/archiso/make.sh @@ -0,0 +1,9 @@ +#!/bin/bash +set -e + +sudo rm -rf /tmp/archiso-work /tmp/archiso-out +cd ~/know/archiso +sudo mkarchiso -v -w /tmp/archiso-work -o /tmp/archiso-out "profile-$1" +iso=(/tmp/archiso-out/*) +sudo dd if="$iso" of="$2" status=progress bs=4M +sudo rm -rf /tmp/archiso-work /tmp/archiso-out diff --git a/arch-user/bin/bemenu/pinentry.sh b/arch-user/bin/bemenu/pinentry.sh new file mode 100755 index 0000000..6b8a9ee --- /dev/null +++ b/arch-user/bin/bemenu/pinentry.sh @@ -0,0 +1,251 @@ +#!/bin/bash -efu +### This file is covered by the GNU General Public License, +### which should be included with libshell as the file LICENSE. +### All copyright information are listed in the COPYING. + +#exec 2>/tmp/pinentry.log +#set -x + +VERSION='1.0' +FLAVOR='bash' + +############################### PATCH ################################# +. ~/.config/bemenu/env.sh +####################################################################### + +keyinfo='' +error='' +timeout=0 +touch_file='' + +readonly def_desc='Enter password for GPG key' +readonly def_prompt='Password:' +readonly def_title='GPG Key Credentials' +readonly def_repeat='Confirm password for GPG key' +readonly def_labelok='OK' +readonly def_labelnotok='Do not do this' +readonly def_labelcancel='Cancel' + +# from /usr/include/gpg-error.h +readonly GPG_ERR_NO_ERROR=0 +readonly GPG_ERR_TIMEOUT=62 +readonly GPG_ERR_CANCELED=99 +readonly GPG_ERR_NOT_CONFIRMED=114 +readonly GPG_ERR_ASS_PARAMETER=280 + +strerror() +{ + case "$1" in + $GPG_ERR_NO_ERROR) echo "Success" ;; + $GPG_ERR_TIMEOUT) echo "Timeout" ;; + $GPG_ERR_CANCELED) echo "Operation cancelled" ;; + $GPG_ERR_NOT_CONFIRMED) echo "Not confirmed" ;; + $GPG_ERR_ASS_PARAMETER) echo "IPC parameter error" ;; + esac +} + +assuan_result() +{ + [ "$1" -gt 0 ] && + echo -n "ERR $(( 5 << 24 | $1 )) " || + echo -n "OK " + strerror "$1" +} + +cmd_settimeout() +{ + [ -n "${1##0*}" ] && [ -n "${1##*[!0-9]*}" ] && [ "$1" -gt 0 ] 2>/dev/null || + return 0 + timeout="$1" + assuan_result $GPG_ERR_NO_ERROR +} + +cmd_setkeyinfo() +{ + [ "$1" = "--clear" ] && + keyinfo="" || + keyinfo="$1" + assuan_result $GPG_ERR_NO_ERROR +} + +set_text_variable() +{ + printf -v "$1" "${2//%/\\x}" + eval "set_$1=1" + assuan_result $GPG_ERR_NO_ERROR +} + +cmd_setoption() +{ + case "$1" in + default-prompt=*) set_text_variable prompt "${1#*=}" ;; + default-ok=*) set_text_variable labelok "${1#*=}" ;; + default-cancel=*) set_text_variable labelcancel "${1#*=}" ;; + touch-file=*) + touch_file="${1#*=}" + assuan_result $GPG_ERR_NO_ERROR + ;; + *) + assuan_result $GPG_ERR_NO_ERROR + ;; + esac +} + +cmd_getinfo() +{ + case "$1" in + version) + echo "D $VERSION" + assuan_result $GPG_ERR_NO_ERROR + ;; + pid) + echo "D $BASHPID" + assuan_result $GPG_ERR_NO_ERROR + ;; + flavor) + echo "D $FLAVOR" + assuan_result $GPG_ERR_NO_ERROR + ;; + ttyinfo) + echo "D - - - - $(id -u 2>/dev/null || echo 0)/$(id -g 2>/dev/null || echo 0) -" + assuan_result $GPG_ERR_NO_ERROR + ;; + *) + assuan_result $GPG_ERR_ASS_PARAMETER + ;; + esac +} + +cmd_getpin() +{ + local ret=0 result output password=1 repeatpassword=3 + + output="$( + echo -n "|" +############################### PATCH ################################# + bemenu \ + --password indicator \ + --prompt "${prompt:-$def_prompt}" \ + /dev/null || + continue + + #echo >&2 "$cmd: $args" + + case "$cmd" in + BYE) + echo "OK closing connection" + exit 0 + ;; + GETPIN) cmd_getpin ;; + CONFIRM) cmd_confirm "$args" ;; + MESSAGE) cmd_confirm --one-button ;; + GETINFO) cmd_getinfo "$args" ;; + SETTIMEOUT) cmd_settimeout "$args" ;; + SETKEYINFO) cmd_setkeyinfo "$args" ;; + OPTION) cmd_setoption "$args" ;; + SETDESC) set_text_variable desc "$args" ;; + SETPROMPT) set_text_variable prompt "$args" ;; + SETTITLE) set_text_variable title "$args" ;; + SETOK) set_text_variable labelok "$args" ;; + SETCANCEL) set_text_variable labelcancel "$args" ;; + SETNOTOK) set_text_variable labelnotok "$args" ;; + SETERROR) set_text_variable error "$args" ;; + SETREPEAT) set_text_variable repeat "$args" ;; + SETREPEATERROR) set_text_variable repeaterror "$args" ;; + *) + assuan_result $GPG_ERR_NO_ERROR + ;; + esac +done diff --git a/arch-user/bin/gpg/reencrypt-to-sym.sh b/arch-user/bin/gpg/reencrypt-to-sym.sh new file mode 100755 index 0000000..a3e7e9d --- /dev/null +++ b/arch-user/bin/gpg/reencrypt-to-sym.sh @@ -0,0 +1,13 @@ +#!/bin/bash +set -e + +if [ -z "$PASSPHRASE" ]; then + read -srp "Password: " PASSPHRASE + echo +fi +export PASSPHRASE + +bash ~/.local/bin/alg/file-tree-apply.sh "$1" "$2" '*.gpg' \ + 'if [ ! -f "$2" ]; then gpg --decrypt "$1" | gpg --symmetric --output "$2" --passphrase "$PASSPHRASE" --batch --yes; fi' + +echo ok diff --git a/arch-user/bin/i3blocks/battery.sh b/arch-user/bin/i3blocks/battery.sh new file mode 100755 index 0000000..698eb87 --- /dev/null +++ b/arch-user/bin/i3blocks/battery.sh @@ -0,0 +1,14 @@ +#!/bin/sh + +read -r stat >~/.local/state/sway/out.log 2>>~/.local/state/sway/err.log diff --git a/arch-user/bin/misc/font-glyphs.sh b/arch-user/bin/misc/font-glyphs.sh new file mode 100755 index 0000000..074c41d --- /dev/null +++ b/arch-user/bin/misc/font-glyphs.sh @@ -0,0 +1,12 @@ +#!/bin/bash +for range in $(fc-match --format='%{charset}\n' "$1"); do + for n in $(seq "0x${range%-*}" "0x${range#*-}"); do + printf "%04x\n" "$n" + done +done | while read -r n_hex; do + count=$((count + 1)) + printf "%-5s\U$n_hex\t" "$n_hex" + [ $((count % 10)) = 0 ] && printf "\n" +done +printf "\n" + diff --git a/arch-user/bin/pacman/uninstall-orphans.sh b/arch-user/bin/pacman/uninstall-orphans.sh new file mode 100755 index 0000000..d5f40dd --- /dev/null +++ b/arch-user/bin/pacman/uninstall-orphans.sh @@ -0,0 +1,2 @@ +#!/bin/sh +pacman -Qdttq | sudo pacman -Rns - diff --git a/arch-user/bin/run.sh b/arch-user/bin/run.sh new file mode 100755 index 0000000..b4873ff --- /dev/null +++ b/arch-user/bin/run.sh @@ -0,0 +1,211 @@ +#!/bin/bash + +LIST=(); +# gui +if [ "$USER" = "yrzam" ]; then + LIST+=( + "web" "web projects" + "web" "web life" + ) + WEB_HAS_PROFILES=1 +else + LIST+=( + "web" "web" + ) +fi +LIST+=( + "gui" "telegram-desktop" + "gui" "gimp" + "gui" "sqlitebrowser" +# tui + "shell_tui" "vifm" + "shell_tui" "vim" + "tui" "htop" + "float_tui" "nmtui" + "float_tui" "bluetoothctl" + "man" "man" + "float_tui" "node" + "term" "term" +# native + "screen_pick" "screenshot output" + "screen_pick" "screenshot selection" + "screen_pick" "color-picker" + "todo" "pass" + "calc" "calc" + "todo" "translate ru-en" + "todo" "translate en-ru" + "grep_dict" "dict" +) +if [ "$FEAT_BRIGHTNESS" ]; then + LIST+=( + "brightness" "brightness" + ) +fi +LIST+=( + "direct" "sway reload" + "power" "logout" + "todo" "inhibit" + "power" "suspend" + "power" "poweroff" + "power" "poweroff --check-inhibitors=no" + "power" "reboot" +) + +sure() { + echo yes | bemenu --prompt "sure?" +} + +# generic +exec_gui() { + exec "$@" +} +exec_tui() { + exec footclient -D ~/ "$@" +} +exec_float_tui() { # todo + exec footclient --app-id="footclient_float" -D ~/ "$@" +} +exec_shell_tui() { + exec footclient -D ~/ "$SHELL" -c "$@" +} +exec_shell_full() { + exec footclient -D ~/ "$SHELL" -c "($1); read -n1" +} +exec_direct() { + exec "$@" +} +exec_term() { + exec footclient -D ~/ +} +# custom +exec_web() { + shift + if [ "$WEB_HAS_PROFILES" ]; then + shift + fi + qutebrowser "$*" +} +exec_man() { + shift + page="$1" + if [ -z "$page" ]; then + page="$( + man -k . | \ + bemenu --prompt "man" | \ + sed ' s/\s\+\-.*//;s/ //g' + )" + fi + [ -n "$page" ] && exec footclient "$SHELL" -c "man '$page' || read -n1" +} +exec_screen_pick() { + if [ "$*" = "screenshot output" ]; then + mon="$(swaymsg -t get_outputs | jq -r '. | map(select(.focused == true)) | .[0].name')" + grim -o "$mon" - | wl-copy -t image/png + notify-send Done -a screenshot "PNG image copied to clipboard" -t 3000 + elif [ "$*" = "screenshot selection" ]; then + grim -g "$(slurp)" - | wl-copy -t image/png + notify-send Done -a screenshot "PNG image copied to clipboard" -t 3000 + elif [ "$*" = "color-picker" ]; then + hex="$( + grim -g "$(slurp -p)" -t ppm - | \ + magick - -format '%[pixel:p{0,0}]' txt:- | \ + tail -n 1 | \ + cut -d ' ' -f 4 + )" + notify-send "$hex" -a screenshot "stnrit" -t 3000 + fi +} +exec_pass() { + echo 1 +} +exec_calc() { + shift + query="$1" + if [ -z "$query" ]; then + query="$(echo "tui" | bemenu --prompt "qalc")" + fi + if [ "$query" = "tui" ]; then + exec_float_tui "qalc" + elif [ -n "$query" ]; then + qalc_res="$(qalc --terse "$query")" + menu_res="$(echo -e "$qalc_res\ntui" | bemenu --prompt "qalc")" + if [ "$qalc_res" = "$menu_res" ]; then + wl-copy "$qalc_res" + notify-send "$qalc_res" -a calc "Result copied to clipboard" -t 3000 + elif [ -n "$menu_res" ]; then + exec_calc _ "$menu_res" + fi + fi +} +exec_transl() { + echo 1 +} +exec_grep_dict() { + shift + dict="$1" + pattern="$2" + dicts_path="$HOME/know/dict/" + if [ -z "$dict" ]; then + dict="$(find "$dicts_path" -type f -printf "%f\n" | bemenu --prompt "dict")" + [ -z "$dict" ] && return + fi + if [ -z "$pattern" ]; then + pattern="$(echo -n | bemenu --prompt "grep $dict")" + [ -z "$pattern" ] && return + fi + res="$({ echo ..; grep "$pattern" "$dicts_path/$dict"; } | bemenu --prompt " ")" + if [ "$res" = ".." ]; then + exec_grep_dict _ "$dict" + else + wl-copy "$res" + notify-send "$res" -a dict "Word copied to clipboard" -t 3000 + fi +} +exec_brightness() { + shift + target="$1" + if [ -z "$target" ]; then + current="$(($(brightnessctl g)*100/$(brightnessctl m)))" + current_i="$((current/5))" + list="$(echo 1%; seq 5 5 100 | sed 's/$/%/')"; + target="$(echo "$list" | bemenu --index $current_i --prompt "$current% ->")"; + fi + if [ -n "$target" ] && [ "$target" != "$current%" ]; then + brightnessctl set "$target" + [ -z "$1" ] && exec_brightness _ + fi +} +exec_power() { + case "$1" in + poweroff|reboot|suspend) sure && systemctl "$@";; + logout) sure && swaymsg exit;; + esac +} + +if [ -n "$1" ]; then + out="$*"; +else + out=$( + for (( i=1; i<${#LIST[@]}; i+=2 )); do + echo "${LIST[$i]}"; + done | bemenu --prompt ">" + ) +fi + + +if [ "$out" ]; then + for (( i=1; i<${#LIST[@]}; i+=2 )); do + if [[ "$out" == "${LIST[$i]}"* ]]; then + executor=${LIST[$((i-1))]} + fi + done + [ -z "$executor" ] && executor=shell_full + + if [ "$executor" = "shell_full" ]; then + "exec_$executor" "$out" + else + eval "executor_args=($out)" + #shellcheck disable=SC2154 + "exec_$executor" "${executor_args[@]}" + fi +fi diff --git a/arch-user/bin/sway/brightness-set-and-notify.sh b/arch-user/bin/sway/brightness-set-and-notify.sh new file mode 100755 index 0000000..cab2e06 --- /dev/null +++ b/arch-user/bin/sway/brightness-set-and-notify.sh @@ -0,0 +1,4 @@ +#!/bin/sh +brig="$(brightnessctl set "$1" -m | sed -e 's/.*,$[0-9]*$%.*/\1/')" +notify-send -t 2000 -h "int:value:$brig" -a "brightness" "$brig%" \ + -h string:x-canonical-private-synchronous:brightness diff --git a/arch-user/bin/sway/command-mode.sh b/arch-user/bin/sway/command-mode.sh new file mode 100755 index 0000000..ffa111d --- /dev/null +++ b/arch-user/bin/sway/command-mode.sh @@ -0,0 +1,6 @@ +#!/bin/bash + +out="$(printf '' | bemenu --prompt ':sway')" +eval "executor_args=($out)" +#shellcheck disable=SC2154 +sway "${executor_args[@]}" diff --git a/arch-user/config/bash/bashrc b/arch-user/config/bash/bashrc new file mode 100644 index 0000000..2cb268b --- /dev/null +++ b/arch-user/config/bash/bashrc @@ -0,0 +1,11 @@ +#!/bin/bash + +[[ $- != *i* ]] && return + +stty intr ^K + +alias ls='ls --color=auto' +alias grep='grep --color=auto' + +export EDITOR=vim +PS1='\[\033[38;2;153;136;255m\]\u@\h:\W\$\[\033[0m\]\[\e[0;91m\]${?#0}\[\e[0m\] ' diff --git a/arch-user/config/bemenu/env.sh.tmpl b/arch-user/config/bemenu/env.sh.tmpl new file mode 100755 index 0000000..3aaf8ff --- /dev/null +++ b/arch-user/config/bemenu/env.sh.tmpl @@ -0,0 +1,24 @@ +#!/bin/sh +export BEMENU_OPTS="\ +--ignorecase \ +--width-factor 0.5 \ +--fn \"{{ .theme.font.name_mono }} {{ math.Add .theme.font.size_base_pt .theme.font.size_step_pt }}\" \ +--list 500 \ +--border 2 \ +--scrollbar autohide \ +--border-radius 4 \ +--bdr #{{ .theme.color.fg_accent }}{{ math.Mul .theme.opacity.med 255 | conv.ToInt64 | printf "%02X" }} \ +--scf #{{ .theme.color.fg_accent }}{{ math.Mul .theme.opacity.med 255 | conv.ToInt64 | printf "%02X" }} \ +--scb #{{ .theme.color.bg }}{{ math.Mul .theme.opacity.high 255 | conv.ToInt64 | printf "%02X" }} \ +--nb #{{ .theme.color.bg }} \ +--ab #{{ .theme.color.bg }} \ +--hb #{{ .theme.color.bg }} \ +--fb #{{ .theme.color.bg }} \ +--tb #{{ .theme.color.bg }} \ +--nf #{{ .theme.color.fg }} \ +--af #{{ .theme.color.fg }} \ +--cf #{{ .theme.color.fg }} \ +--hf #{{ .theme.color.fg_accent }} \ +--tf #{{ .theme.color.fg_accent }} \ +--ff #{{ .theme.color.fg_accent }} \ +" diff --git a/arch-user/config/foot/foot.ini.tmpl b/arch-user/config/foot/foot.ini.tmpl new file mode 100644 index 0000000..5905ad0 --- /dev/null +++ b/arch-user/config/foot/foot.ini.tmpl @@ -0,0 +1,255 @@ +# -*- conf -*- + +# shell=$SHELL (if set, otherwise user's default shell from /etc/passwd) +# term=foot (or xterm-256color if built with -Dterminfo=disabled) +# login-shell=no + +# app-id=foot # globally set wayland app-id. Default values are "foot" and "footclient" for desktop and server mode +title=term +# locked-title=no +font={{ .theme.font.name_mono }}:size={{ .theme.font.size_base_pt }} +# font-bold= +# font-italic= +# font-bold-italic= +# font-size-adjustment=0.5 +# line-height= +# letter-spacing=0 +# horizontal-letter-offset=0 +# vertical-letter-offset=0 +# underline-offset= +# underline-thickness= +# strikeout-thickness= +# box-drawings-uses-font-glyphs=no +# dpi-aware=no + +# initial-window-size-pixels=700x500 # Or, +# initial-window-size-chars= +# initial-window-mode=windowed +pad=8x4 # optionally append 'center' +# resize-by-cells=yes +# resize-keep-grid=yes +# resize-delay-ms=100 + +# bold-text-in-bright=no +# word-delimiters=,│`|:"'()[]{}<> +# selection-target=primary +# workers= +# utmp-helper=/usr/lib/utempter/utempter # When utmp backend is ‘libutempter’ (Linux) +# utmp-helper=/usr/libexec/ulog-helper # When utmp backend is ‘ulog’ (FreeBSD) + +[environment] +# name=value + +[bell] +urgent=yes +# notify=no +# visual=no +# command= +# command-focused=no + +[desktop-notifications] +# command=notify-send --wait --app-name ${app-id} --icon ${app-id} --category ${category} --urgency ${urgency} --expire-time ${expire-time} --hint STRING:image-path:${icon} --hint BOOLEAN:suppress-sound:${muted} --hint STRING:sound-name:${sound-name} --replace-id ${replace-id} ${action-argument} --print-id -- ${title} ${body} +# command-action-argument=--action ${action-name}=${action-label} +# close="" +# inhibit-when-focused=yes + + +[scrollback] +# lines=1000 +# multiplier=3.0 +# indicator-position=relative +# indicator-format="" + +[url] +# launch=xdg-open ${url} +# label-letters=sadfjklewcmpgh +# osc8-underline=url-mode +# protocols=http, https, ftp, ftps, file, gemini, gopher +# uri-characters=abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789-_.,~:;/?#@!$&%*+="'()[] + +[cursor] +# style=block +# color= +# blink=no +blink-rate=250 +# beam-thickness=1.5 +# underline-thickness= + +[mouse] +# hide-when-typing=no +# alternate-scroll-mode=yes + +[touch] +# long-press-delay=400 + +[colors] +#alpha=1 +background={{ .theme.color.bg }} +foreground={{ .theme.color.fg }} +# flash=7f7f00 +# flash-alpha=0.5 + +## Normal/regular colors (color palette 0-7) +# regular0=242424 # black +# regular1=f62b5a # red +# regular2=47b413 # green +# regular3=e3c401 # yellow +# regular4=24acd4 # blue +# regular5=f2affd # magenta +# regular6=13c299 # cyan +# regular7=e6e6e6 # white + +## Bright colors (color palette 8-15) +# bright0=616161 # bright black +# bright1=ff4d51 # bright red +# bright2=35d450 # bright green +# bright3=e9e836 # bright yellow +# bright4=5dc5f8 # bright blue +# bright5=feabf2 # bright magenta +# bright6=24dfc4 # bright cyan +# bright7=ffffff # bright white + +## dimmed colors (see foot.ini(5) man page) +# dim0= +# ... +# dim7= + +## The remaining 256-color palette +# 16 = <256-color palette #16> +# ... +# 255 = <256-color palette #255> + +## Sixel colors +# sixel0 = 000000 +# sixel1 = 3333cc +# sixel2 = cc2121 +# sixel3 = 33cc33 +# sixel4 = cc33cc +# sixel5 = 33cccc +# sixel6 = cccc33 +# sixel7 = 878787 +# sixel8 = 424242 +# sixel9 = 545499 +# sixel10 = 994242 +# sixel11 = 549954 +# sixel12 = 995499 +# sixel13 = 549999 +# sixel14 = 999954 +# sixel15 = cccccc + +## Misc colors +# selection-foreground= +# selection-background= +# jump-labels= # black-on-yellow +# scrollback-indicator= # black-on-bright-blue +# search-box-no-match= # black-on-red +# search-box-match= # black-on-yellow +# urls= + +[csd] +# preferred=server +# size=26 +# font= +# color= +# hide-when-maximized=no +# double-click-to-maximize=yes +# border-width=0 +# border-color= +# button-width=26 +# button-color= +# button-minimize-color= +# button-maximize-color= +# button-close-color= + +[key-bindings] +# scrollback-up-page=Shift+Page_Up +# scrollback-up-half-page=none +# scrollback-up-line=none +# scrollback-down-page=Shift+Page_Down +# scrollback-down-half-page=none +# scrollback-down-line=none +# scrollback-home=none +# scrollback-end=none +clipboard-copy=Control+c XF86Copy +clipboard-paste=Control+v XF86Paste +# primary-paste=Shift+Insert +# search-start=Control+Shift+r +# font-increase=Control+plus Control+equal Control+KP_Add +# font-decrease=Control+minus Control+KP_Subtract +# font-reset=Control+0 Control+KP_0 +# spawn-terminal=Control+Shift+n +# minimize=none +# maximize=none +# fullscreen=none +# pipe-visible=[sh -c "xurls | fuzzel | xargs -r firefox"] none +# pipe-scrollback=[sh -c "xurls | fuzzel | xargs -r firefox"] none +# pipe-selected=[xargs -r firefox] none +# pipe-command-output=[wl-copy] none # Copy last command's output to the clipboard +# show-urls-launch=Control+Shift+o +# show-urls-copy=none +# show-urls-persistent=none +# prompt-prev=Control+Shift+z +# prompt-next=Control+Shift+x +# unicode-input=Control+Shift+u +# noop=none + +[search-bindings] +# cancel=Control+g Control+c Escape +# commit=Return +# find-prev=Control+r +# find-next=Control+s +# cursor-left=Left Control+b +# cursor-left-word=Control+Left Mod1+b +# cursor-right=Right Control+f +# cursor-right-word=Control+Right Mod1+f +# cursor-home=Home Control+a +# cursor-end=End Control+e +# delete-prev=BackSpace +# delete-prev-word=Mod1+BackSpace Control+BackSpace +# delete-next=Delete +# delete-next-word=Mod1+d Control+Delete +# extend-char=Shift+Right +# extend-to-word-boundary=Control+w Control+Shift+Right +# extend-to-next-whitespace=Control+Shift+w +# extend-line-down=Shift+Down +# extend-backward-char=Shift+Left +# extend-backward-to-word-boundary=Control+Shift+Left +# extend-backward-to-next-whitespace=none +# extend-line-up=Shift+Up +clipboard-paste=Control+v Control+y XF86Paste +# primary-paste=Shift+Insert +# unicode-input=none +# quit=none +# scrollback-up-page=Shift+Page_Up +# scrollback-up-half-page=none +# scrollback-up-line=none +# scrollback-down-page=Shift+Page_Down +# scrollback-down-half-page=none +# scrollback-down-line=none +# scrollback-home=none +# scrollback-end=none + +[url-bindings] +# cancel=Control+g Control+c Control+d Escape +# toggle-url-visible=t + +[text-bindings] +# \x03=Mod4+c # Map Super+c -> Ctrl+c + +[mouse-bindings] +# scrollback-up-mouse=BTN_WHEEL_BACK +# scrollback-down-mouse=BTN_WHEEL_FORWARD +# font-increase=Control+BTN_WHEEL_BACK +# font-decrease=Control+BTN_WHEEL_FORWARD +# selection-override-modifiers=Shift +# primary-paste=BTN_MIDDLE +# select-begin=BTN_LEFT +# select-begin-block=Control+BTN_LEFT +# select-extend=BTN_RIGHT +# select-extend-character-wise=Control+BTN_RIGHT +# select-word=BTN_LEFT-2 +# select-word-whitespace=Control+BTN_LEFT-2 +# select-quote = BTN_LEFT-3 +# select-row=BTN_LEFT-4 + +# vim: ft=dosini diff --git a/arch-user/config/git/config b/arch-user/config/git/config new file mode 100644 index 0000000..4ad2494 --- /dev/null +++ b/arch-user/config/git/config @@ -0,0 +1,7 @@ +[user] + email = {{ .user.GIT_USER_EMAIL }} + name = {{ .user.GIT_USER_NAME }} +[init] + defaultBranch = main +[pull] + rebase = false diff --git a/arch-user/config/gnupg/env.sh b/arch-user/config/gnupg/env.sh new file mode 100755 index 0000000..92f5efb --- /dev/null +++ b/arch-user/config/gnupg/env.sh @@ -0,0 +1,7 @@ +#!/bin/sh +unset SSH_AGENT_PID +if [ "${gnupg_SSH_AUTH_SOCK_by:-0}" -ne $$ ]; then + export SSH_AUTH_SOCK="$(gpgconf --list-dirs agent-ssh-socket)" +fi +export GPG_TTY=$(tty) +gpg-connect-agent updatestartuptty /bye >/dev/null diff --git a/arch-user/config/gnupg/gpg-agent.conf b/arch-user/config/gnupg/gpg-agent.conf new file mode 100644 index 0000000..ff149ec --- /dev/null +++ b/arch-user/config/gnupg/gpg-agent.conf @@ -0,0 +1 @@ +pinentry-program ~/.local/bin/bemenu/pinentry.sh diff --git a/arch-user/config/i3blocks/config b/arch-user/config/i3blocks/config new file mode 100644 index 0000000..4609932 --- /dev/null +++ b/arch-user/config/i3blocks/config @@ -0,0 +1,26 @@ +separator_block_width=20 +command=~/.local/bin/i3blocks/$BLOCK_NAME.sh + +[weather] +label=⛅ +interval=3600 + +{{ if file.Exists "/sys/class/power_supply/ACAD/" }} +[battery] +interval=10 +{{ end }} + +[volume] +interval=once +signal=2 + +[xkb_layout] +label=⌨ +interval=once +signal=1 + +[time] +label=🕓 +command=date +"%Y-%m-%dT%H:%M:%SZ" +interval=1 + diff --git a/arch-user/config/mako/config.tmpl b/arch-user/config/mako/config.tmpl new file mode 100644 index 0000000..f2c4235 --- /dev/null +++ b/arch-user/config/mako/config.tmpl @@ -0,0 +1,9 @@ +format=%s - %a\n%b +font=Roboto 10 +background-color=#{{ .theme.color.bg_accent_dark }}{{ math.Mul .theme.opacity.high 255 | conv.ToInt64 | printf "%02X" }} +border-size=2 +border-radius=4 +border-color=#{{ .theme.color.fg_accent }}{{ math.Mul .theme.opacity.med 255 | conv.ToInt64 | printf "%02X" }} +padding=5,10 +width=400 +progress-color=#{{ .theme.color.fg_accent }}{{ math.Mul .theme.opacity.med 255 | conv.ToInt64 | printf "%02X" }} diff --git a/arch-user/config/pass/env.sh b/arch-user/config/pass/env.sh new file mode 100755 index 0000000..5b77089 --- /dev/null +++ b/arch-user/config/pass/env.sh @@ -0,0 +1,4 @@ +#!/bin/sh + +export PASSWORD_STORE_DIR="$HOME/know/id" +export PASSWORD_STORE_GENERATED_LENGTH=16 diff --git a/arch-user/config/profile b/arch-user/config/profile new file mode 100644 index 0000000..ff0215e --- /dev/null +++ b/arch-user/config/profile @@ -0,0 +1,16 @@ +#!/bin/bash + +export PATH=$PATH:~/.local/bin + +export WLR_RENDERER=vulkan + +for fpath in ~/.config/*/env.sh; do + . "$fpath" +done + +unset SSH_AGENT_PID +if [ "${gnupg_SSH_AUTH_SOCK_by:-0}" -ne $$ ]; then + export SSH_AUTH_SOCK="$(gpgconf --list-dirs agent-ssh-socket)" +fi +export GPG_TTY=$(tty) +gpg-connect-agent updatestartuptty /bye >/dev/null diff --git a/arch-user/config/qutebrowser/config.py b/arch-user/config/qutebrowser/config.py new file mode 100644 index 0000000..3079b61 --- /dev/null +++ b/arch-user/config/qutebrowser/config.py @@ -0,0 +1,66 @@ +#import time +#start_ts=time.time() + +import os +env=os.environ + +################# general ############ +config.load_autoconfig(False) +c.tabs.tabs_are_windows = True +c.tabs.show = 'never' +###################################### + +############### keybinds ############## +for mode in ['normal','insert','hint','passthrough','command','prompt','yesno','register']: + m = c.bindings.commands[mode]={} + d = c.bindings.default[mode] + + m[''] = 'fake-key -g ' + m[''] = 'fake-key -g ' + m[''] = 'fake-key -g ' + + noremap=[ + 'n','h', 'N','H', '','', + 'e','k', 'E','K', '','', + 'i','j', 'I','J', '','', + 'o','l', 'O','L', '','', + + 'k','n', 'K','N', '','', + 'l','i', 'L','I', '','', + 'h','o', 'H','O', '','', + 'j','e' 'J','E', '','', + ] + for i in range(0,len(noremap)-1,2): + cmd=d.get(noremap[i+1]) + if(cmd): + m[noremap[i]]=cmd + +#config.unbind('.') +#en_keys = "qwertyuiop[]asdfghjkl;'zxcvbnm,./"+'QWERTYUIOP{}ASDFGHJKL:"ZXCVBNM<>?' +#ru_keys = 'йцукенгшщзхъфывапролджэячсмитьбю.'+'ЙЦУКЕНГШЩЗХЪФЫВАПРОЛДЖЭЯЧСМИТЬБЮ,' +#c.bindings.key_mappings.update(dict(zip(ru_keys, en_keys))) +############################################ + +# styles +c.colors.webpage.preferred_color_scheme = 'dark' +c.colors.webpage.darkmode.enabled = True +c.colors.webpage.bg = '#'+env['QB_THEME_COLOR_BG'] +c.fonts.default_family = 'Roboto' +########################################## + +# search engines +c.url.searchengines = { + 'DEFAULT': 'https://lite.duckduckgo.com/lite?&q={}', + '!d': 'https://lite.duckduckgo.com/lite?&q={}', + '!g': 'https://google.com/search?hl=en&q={}', + '!y': 'https://ya.ru/search/?text={}', + '!c': 'https://chat.openai.com/chat?q={}', +} +########################################### + +# start page ############ +c.url.default_page = 'file:///home/'+env['USER']+'/.local/share/qutebrowser/start.html' +c.url.start_pages = ['file:///home/'+env['USER']+'/.local/share/qutebrowser/start.html'] +######################################## + +#print(f"Execution time {time.time() - start_ts}") diff --git a/arch-user/config/qutebrowser/env.sh.tmpl b/arch-user/config/qutebrowser/env.sh.tmpl new file mode 100755 index 0000000..5d5c15c --- /dev/null +++ b/arch-user/config/qutebrowser/env.sh.tmpl @@ -0,0 +1,3 @@ +#!/bin/sh + +export QB_THEME_COLOR_BG={{ .theme.color.bg }} diff --git a/arch-user/config/readline/env.sh b/arch-user/config/readline/env.sh new file mode 100755 index 0000000..af4cbff --- /dev/null +++ b/arch-user/config/readline/env.sh @@ -0,0 +1,3 @@ +#!/bin/sh + +export INPUTRC="$HOME/.config/readline/inputrc" diff --git a/arch-user/config/readline/inputrc b/arch-user/config/readline/inputrc new file mode 100644 index 0000000..dc42395 --- /dev/null +++ b/arch-user/config/readline/inputrc @@ -0,0 +1,36 @@ +set editing-mode vi + +########### prompt ############## +set show-mode-in-prompt on +set vi-ins-mode-string \1\e[1 q\2 +set vi-cmd-mode-string \1\e[2 q\2 +################################# + +##### remap - colemak-dh ####### +set keymap vi-command + +# n -> h +"n":backward-char +"N":beginning-of-line +# e -> k +"e":previous-history +"\C-e":kill-line +# i -> j +"i":next-history +"\C-i":accept-line +# o -> l +"o":forward-char +"\C-o":clear-screen + +# k -> n +"k":vi-search-again +"K":vi-search-again +# j -> e +"j":vi-end-word +"J":vi-end-word +# l -> i +"l":vi-insertion-mode +"L":vi-insert-beg +# h -> o +# noop +################################# diff --git a/arch-user/config/sway/config.tmpl b/arch-user/config/sway/config.tmpl new file mode 100644 index 0000000..7233965 --- /dev/null +++ b/arch-user/config/sway/config.tmpl @@ -0,0 +1,147 @@ +# vim: filetype=swayconfig + +set $mod Mod4 +set $altmod Mod4+Mod5 +set $altmod2 Mod4+Shift +set $kbmod Alt_R +set $fwd m +set $left n +set $up e +set $down i +set $right o +set $bwd apostrophe + +################ styles #################### +default_border pixel 1 +smart_borders on +title_align center +font pango:{{ .theme.font.name_regular }} {{ math.Sub .theme.font.size_base_pt .theme.font.size_step_pt }} +output * bg #{{ .theme.color.bg }} solid_color +client.focused #{{ .theme.color.bg_accent_light }} #{{ .theme.color.bg_accent_light }} #{{ .theme.color.fg }} #{{ .theme.color.fg_accent }} #{{ .theme.color.bg_accent_light }} +client.focused_tab_title #{{ .theme.color.bg_accent_light }}{{ math.Mul .theme.opacity.med 255 | conv.ToInt64 | printf "%02X" }} #{{ .theme.color.bg_accent_light }}{{ math.Mul .theme.opacity.med 255 | conv.ToInt64 | printf "%02X" }} #{{ .theme.color.fg_dark }} #{{ .theme.color.fg_accent }} #{{ .theme.color.bg_accent_light }}{{ math.Mul .theme.opacity.low 255 | conv.ToInt64 | printf "%02X" }} +client.focused_inactive #{{ .theme.color.bg_accent_light }}{{ math.Mul .theme.opacity.med 255 | conv.ToInt64 | printf "%02X" }} #{{ .theme.color.bg_accent_light }}{{ math.Mul .theme.opacity.med 255 | conv.ToInt64 | printf "%02X" }} #{{ .theme.color.fg_dark }} #{{ .theme.color.fg_accent }} #{{ .theme.color.bg_accent_light }}{{ math.Mul .theme.opacity.low 255 | conv.ToInt64 | printf "%02X" }} +client.unfocused #{{ .theme.color.bg_accent_dark }} #{{ .theme.color.bg_accent_dark }} #{{ .theme.color.fg_dark }} #{{ .theme.color.fg_accent }} #{{ .theme.color.bg_accent_light }}{{ math.Mul .theme.opacity.low 255 | conv.ToInt64 | printf "%02X" }} +client.urgent #{{ .theme.color.fg_accent }} #{{ .theme.color.fg_accent }} #{{ .theme.color.fg }} #{{ .theme.color.fg_accent }} #{{ .theme.color.fg_accent }} +bar { + position top + font pango:{{ .theme.font.name_regular }} {{ .theme.font.size_base_pt }} + status_command i3blocks + strip_workspace_numbers yes + separator_symbol | + workspace_min_width 28 + tray_output none + colors { + statusline #{{ .theme.color.fg }} + background #{{ .theme.color.bg }} + separator #{{ .theme.color.fg_dark }} + focused_workspace #{{ .theme.color.bg_accent_light }} #{{ .theme.color.bg_accent_light }} #{{ .theme.color.fg }} + inactive_workspace #{{ .theme.color.bg_accent_dark }} #{{ .theme.color.bg_accent_dark }} #{{ .theme.color.fg }} + urgent_workspace #{{ .theme.color.fg_accent }} #{{ .theme.color.fg_accent }} #{{ .theme.color.fg }} + binding_mode #{{ .theme.color.fg_accent }} #{{ .theme.color.fg_accent }} #{{ .theme.color.fg }} + } +} +########################################### + +################ inputs #################### +input "type:keyboard" { + xkb_layout us(yz),ru(yz) + repeat_rate 50 +} +bindsym --to-code $kbmod input "type:keyboard" xkb_switch_layout next; exec pkill -SIGRTMIN+1 i3blocks +input "type:touchpad" { + tap enabled + natural_scroll enabled +} +############################################ + +############### workspaces ################# +bindsym --to-code { + $mod+a workspace 1:A + $mod+r workspace 2:R + $mod+s workspace 3:S + $mod+t workspace 4:T + $mod+g workspace 5:G + $altmod+a move container to workspace 1:A; workspace 1:A + $altmod+r move container to workspace 2:R; workspace 2:R + $altmod+s move container to workspace 3:S; workspace 3:S + $altmod+t move container to workspace 4:T; workspace 4:T + $altmod+g move container to workspace 5:G; workspace 5:G +} +bindgesture swipe:right workspace prev +bindgesture swipe:left workspace next +############################################ + +############### containers ################# +# top row - layouts +bindsym --to-code { + $mod+p layout splith + $altmod+p split h + $mod+l layout splitv + $altmod+l split v + $mod+f fullscreen + $mod+w layout tabbed + $altmod+w split v; layout tabbed + $mod+u split none + $mod+y layout stacking + $altmod+y split h; layout stacking +} +# mid row - focus, movement +bindsym --to-code { + $mod+$fwd focus child + $mod+$left focus left + $mod+$up focus up + $mod+$down focus down + $mod+$right focus right + $mod+$bwd focus parent + $altmod+$left move left 40px + $altmod+$up move up 40px + $altmod+$down move down 40px + $altmod+$right move right 40px + $altmod2+$left resize shrink width 2ppt or 40px + $altmod2+$up resize shrink height 4ppt or 40px + $altmod2+$down resize grow height 4ppt or 40px + $altmod2+$right resize grow width 2ppt or 40px +} +# bottom row - 3d +bindsym --to-code { + $mod+x scratchpad show + $altmod+x sticky enable; move scratchpad + $mod+v focus floating + $altmod+v floating enable; sticky enable + $mod+d focus tiling + $altmod+d focus floating; floating disable; sticky disable; + $mod+k focus prev sibling + $mod+Comma opacity minus 0.05 + $mod+Period opacity plus 0.05 + $mod+slash focus next sibling +} +floating_modifier $mod normal +############################################ + +################## actions #################### +bindsym --to-code { + # generic + $mod+Escape kill + # media + XF86MonBrightnessDown exec ~/.local/bin/sway/brightness-set-and-notify.sh 5%- + XF86MonBrightnessUp exec ~/.local/bin/sway/brightness-set-and-notify.sh 5%+ + XF86AudioMute exec pactl set-sink-mute \@DEFAULT_SINK@ toggle && pkill -SIGRTMIN+2 i3blocks + XF86AudioLowerVolume exec pactl set-sink-volume \@DEFAULT_SINK@ -5% && pkill -SIGRTMIN+2 i3blocks + XF86AudioRaiseVolume exec pactl set-sink-volume \@DEFAULT_SINK@ +5% && pkill -SIGRTMIN+2 i3blocks + XF86AudioMicMute exec pactl set-source-mute \@DEFAULT_SOURCE@ toggle && pkill -SIGRTMIN+2 i3blocks + # basic scripts + $mod+Colon exec ~/.local/bin/sway/command-mode.sh + $mod+Return exec footclient + $mod+Space exec run.sh +} +############################################## + +################# daemons #################### +exec foot -s +exec mako +exec swayidle +############################################## + +############## app-specific ################## +for_window [app_id="_float"] floating enable, resize set 960 540 +############################################## diff --git a/arch-user/config/swayidle/config b/arch-user/config/swayidle/config new file mode 100644 index 0000000..c8ec1bf --- /dev/null +++ b/arch-user/config/swayidle/config @@ -0,0 +1,2 @@ +timeout 280 'notify-send "Suspend in 20s" "Produce some acivity or run inhibit to cancel" -a "idle" -t 20000' +timeout 300 'systemctl suspend' diff --git a/arch-user/config/theme.json b/arch-user/config/theme.json new file mode 100644 index 0000000..8c3c109 --- /dev/null +++ b/arch-user/config/theme.json @@ -0,0 +1,21 @@ +{ + "color": { + "fg": "ffffff", + "fg_dark": "b8bcc1", + "fg_accent": "9988ff", + "bg": "0d1117", + "bg_accent_light":"510079", + "bg_accent_dark":"020030" + }, + "opacity": { + "low": 0.2, + "med": 0.55, + "high": 0.85 + }, + "font": { + "name_regular": "Roboto", + "name_mono": "Roboto Mono", + "size_base_pt": 12, + "size_step_pt": 1.5 + } +} diff --git a/arch-user/config/vim/vimrc b/arch-user/config/vim/vimrc new file mode 100644 index 0000000..9a9a31f --- /dev/null +++ b/arch-user/config/vim/vimrc @@ -0,0 +1,134 @@ +"########## system ########### +set nocompatible +set ttyfast +set encoding=utf-8 +set mouse=a +set autoread +au FocusGained,BufEnter * silent! checktime +"############################# + +"######### generic ########### + +" status line +set showmode +set showcmd +set ruler + +" syntax hl +syntax enable +filetype on +filetype plugin on + +" lines +set number +set relativenumber +set numberwidth=3 +set wrap +set showmatch " brackets + +" search +set hlsearch +set incsearch +set ignorecase +set smartcase + +" tabs +set shiftwidth=4 +set tabstop=4 +set softtabstop=0 +set noexpandtab + +" scroll +set scrolloff=5 + +" commands +set wildmenu +set wildmode=list:longest,full +set gdefault + +"########################################### + +"############## file-specific ############### +autocmd FileType markdown setlocal spell +autocmd FileType gitcommit setlocal spell +autocmd FileType markdown setlocal complete+=kspell +autocmd FileType gitcommit setlocal complete+=kspell +"############################################ + +"####### remap - colemak-dh ####### + +" n -> h +noremap n h +noremap N H +noremap!

+" e -> k +noremap e k +noremap E K +noremap!

+" i -> j +noremap i j +noremap I J +noremap!

+" o -> l +noremap o l +noremap O L +noremap!

+ +" k -> n +noremap k n +noremap K N +noremap!

+" j -> e +noremap j e +noremap J E +noremap!

+" l -> i +noremap l i +noremap L I +noremap!

+" h -> o +noremap h o +noremap H O +noremap!

+ +"################################# + +"####### custom commands ######### +" W - Save file as superuser +command! W execute 'w !sudo tee % > /dev/null' edit! +"################################# + +"######### localization ########## +set langmap=йЙцЦуУкКеЕнНгГшШщЩзЗхХъЪфФыЫвВаАпПрРоОлЛдДжЖэЭяЯчЧсСмМиИтТьЬбБюЮ.\\,;qQwWfFpPbBjJlLuUyY;:[{]}aArRsStTgGmMnNeEiIoO'\"xXcCdDvVzZkKhH\\,<.>/? +noremap о ь +noremap О Ь +noremap

+noremap л т +noremap Л Т +noremap

+noremap д н +noremap Д Н +noremap

+noremap ж г +noremap Ж Г +noremap

+noremap т о +noremap Т О +noremap

+noremap г д +noremap Г Д +noremap

+noremap ь ж +noremap Ь Ж +noremap

+noremap н л +noremap Н Л +noremap

+"################################# + +"############# hacks ############# +{{ if ne .Env.IS_COMPAT "1" }} +autocmd TextYankPost * if (v:event.operator == 'y' || v:event.operator == 'd') | silent! execute 'call system("wl-copy", @")' | endif +nnoremap p :let @"=substitute(system("wl-paste --no-newline"), '

', '', 'g')p +{{ end }} +"################################ diff --git a/arch-user/config/workspace.conf b/arch-user/config/workspace.conf new file mode 100644 index 0000000..8f182f8 --- /dev/null +++ b/arch-user/config/workspace.conf @@ -0,0 +1,2 @@ +GIT_USER_EMAIL= +GIT_USER_NAME= diff --git a/arch-user/config/xkb/symbols/ru b/arch-user/config/xkb/symbols/ru new file mode 100644 index 0000000..0af1d80 --- /dev/null +++ b/arch-user/config/xkb/symbols/ru @@ -0,0 +1,37 @@ +xkb_symbols "yz" { + + include "ru(common)" + name[Group1]= "RU-yz"; + + # functional + key.type = "ONE_LEVEL"; + replace key { [ BackSpace ] }; + replace key { [ Escape ] }; + replace key { [ Tab ] }; + + # modifiers + key.type = "ONE_LEVEL"; + replace key { [ Control_L ] }; + replace key { [ Super_L ] }; + replace key { [ Alt_R ] }; + replace key { [ ISO_Level3_Shift ] }; + replace key { [ Alt_L ] }; + + # character remap + key.type = "FOUR_LEVEL"; + key { [ backslash, bar, notsign, brokenbar ] }; + #key { [ colon, semicolon, odiaeresis, Odiaeresis ] }; + + # layer3 + # TODO: migrate to type=ALPHANUMERIC + # This would fix caps lock which i dont use anyway + key.type = "FOUR_LEVEL"; + # navigation + key { [ space, space, Tab, nobreakspace ] }; + key { [ Cyrillic_o, Cyrillic_O, Left, eacute] }; + key { [ Cyrillic_el, Cyrillic_EL, Up, eacute ] }; + key { [ Cyrillic_de, Cyrillic_DE, Down, iacute ] }; + key { [ Cyrillic_zhe, Cyrillic_ZHE, Right, oacute ] }; + # special + key { [ Cyrillic_shorti, Cyrillic_SHORTI, asciitilde, dead_tilde ] }; +}; diff --git a/arch-user/config/xkb/symbols/us b/arch-user/config/xkb/symbols/us new file mode 100644 index 0000000..12981b0 --- /dev/null +++ b/arch-user/config/xkb/symbols/us @@ -0,0 +1,38 @@ +xkb_symbols "yz" { + + include "us(colemak_dh)" + name[Group1]= "EN-yz"; + + # functional + key.type = "ONE_LEVEL"; + replace key { [ BackSpace ] }; + replace key { [ Escape ] }; + replace key { [ Tab ] }; + + # modifiers + key.type = "ONE_LEVEL"; + replace key { [ Control_L ] }; + replace key { [ Super_L ] }; + replace key { [ Alt_R ] }; + replace key { [ ISO_Level3_Shift ] }; + replace key { [ Alt_L ] }; + + # character remap + key.type = "FOUR_LEVEL"; + key { [ backslash, bar, notsign, brokenbar ] }; + key { [ colon, semicolon, odiaeresis, Odiaeresis ] }; + + # layer3 + # TODO: migrate to type=ALPHANUMERIC + # This would fix caps lock which i dont use anyway + key.type = "FOUR_LEVEL"; + # navigation + key { [ space, space, Tab, nobreakspace ] }; + key { [ n, N, Left, eacute] }; + key { [ e, E, Up, eacute ] }; + key { [ i, I, Down, iacute ] }; + key { [ o, O, Right, oacute ] }; + # special + key { [ q, Q, asciitilde, dead_tilde ] }; + +}; diff --git a/arch-user/data/qutebrowser/start.html.tmpl b/arch-user/data/qutebrowser/start.html.tmpl new file mode 100644 index 0000000..49bf495 --- /dev/null +++ b/arch-user/data/qutebrowser/start.html.tmpl @@ -0,0 +1,19 @@ + + + + + + + + + + diff --git a/arch-user/gen-linux-compat.sh b/arch-user/gen-linux-compat.sh new file mode 100755 index 0000000..75528af --- /dev/null +++ b/arch-user/gen-linux-compat.sh @@ -0,0 +1,9 @@ +#!/bin/bash + +set -e +cd "$(dirname "$(readlink -f -- "$0")")" +umask 002 + +export IS_COMPAT=1 +gomplate --file config/vim/vimrc --out ../linux-compat/home/.vimrc +gomplate --file config/readline/inputrc --out ../linux-compat/home/.inputrc diff --git a/arch-user/install.sh b/arch-user/install.sh new file mode 100755 index 0000000..7d6f828 --- /dev/null +++ b/arch-user/install.sh @@ -0,0 +1,93 @@ +#!/bin/bash + +# config/ - configuration files (including shell and profile) +# data/ - resource files used by configured system +# bin/ - scripts used either by configured system or by user + +set -e +cd "$(dirname "$(readlink -f -- "$0")")" +umask 002 +[[ "$(id -u)" == "0" ]] && echo "ERROR: wrong user" >&1 && exit 1 + +########## init config ######### +if [[ ! -f ~/.config/workspace.conf ]]; then + mkdir -p ~/.config + cp config/workspace.conf ~/.config +fi +while read -r line; do + param="${line::-1}" + if ! grep -qE "^$param=.+" ~/.config/workspace.conf; then + echo "ERROR: ~/.config/workspace.conf - missing $param" + CONFIG_INVALID=1 + fi +done < config/workspace.conf +[[ $CONFIG_INVALID ]] && exit 1 +################################ + +####### file structure ######### +USER_DIRS=( + ##### xdg ##### + ~/.config # bkp=weak + ~/.local/bin # bkp=weak + ~/.local/share # bkp=weak + ~/.local/state + ~/.cache + # app + ~/.local/state/sway + ################ + ##### user ##### + # core knowledge base + ~/know # bkp=true,roam=true + # large blobs for knowledge base + ~/know-lfs # Large blobs for knowledge base. bkp=weak + # temp files with manual bulk cleanup + ~/tmp + # downloads + ~/dl # bkp=weak + # development - external vcs, tons of deps, etc. + ~/dev # bkp=weak + ################ +) +mkdir -p "${USER_DIRS[@]}" +################################ + +########## scripts ############# +cp -rf bin/* ~/.local/bin + +LN_EXCLUDE_DIRS=(i3blocks bemenu) + +ln_exclude_dirs_cmp=" ${LN_EXCLUDE_DIRS[*]} " +for sdir in bin/*; do + [ ! -d "$sdir" ] && continue + sdir="${sdir##*/}" + [[ $ln_exclude_dirs_cmp == *" $sdir "* ]] && continue + find ~/.local/bin -maxdepth 1 -type l -name "$sdir-*" \ + -exec rm {} \; + #shellcheck disable=SC2016 + find ~/.local/bin/"$sdir" -maxdepth 1 -type f -perm -u+rwx | \ + xargs -0 -d \\n -n 1 sh -c 'ln -s "$1" "/$HOME/.local/bin/$(basename "$(dirname "$1")")-${1##*/}"' sh +done +################################ + +########### config ############# +export IS_COMPAT=0 +gomplate --input-dir config \ + --output-map "$HOME/.config/{{ .in | strings.ReplaceAll \".tmpl\" \"\" }}" \ + --exclude-processing "!*.tmpl" \ + --plugin jq=/bin/jq \ + -c theme=config/theme.json \ + -c user="file:///$HOME/.config/workspace.conf?type=application/x-env" \ + --exclude /workspace.conf + +ln -sf ~/.config/bash/bashrc ~/.bashrc +ln -sf ~/.config/profile ~/.profile +mkdir -p ~/.gnupg && ln -sf ~/.config/gnupg/gpg-agent.conf ~/.gnupg +################################ + +############# data ############ +cp -rf data/* ~/.local/share +############################### + +swaymsg reload || true + +echo ok diff --git a/linux-compat/home/.inputrc b/linux-compat/home/.inputrc new file mode 100644 index 0000000..dc42395 --- /dev/null +++ b/linux-compat/home/.inputrc @@ -0,0 +1,36 @@ +set editing-mode vi + +########### prompt ############## +set show-mode-in-prompt on +set vi-ins-mode-string \1\e[1 q\2 +set vi-cmd-mode-string \1\e[2 q\2 +################################# + +##### remap - colemak-dh ####### +set keymap vi-command + +# n -> h +"n":backward-char +"N":beginning-of-line +# e -> k +"e":previous-history +"\C-e":kill-line +# i -> j +"i":next-history +"\C-i":accept-line +# o -> l +"o":forward-char +"\C-o":clear-screen + +# k -> n +"k":vi-search-again +"K":vi-search-again +# j -> e +"j":vi-end-word +"J":vi-end-word +# l -> i +"l":vi-insertion-mode +"L":vi-insert-beg +# h -> o +# noop +################################# diff --git a/linux-compat/home/.vimrc b/linux-compat/home/.vimrc new file mode 100644 index 0000000..669c03e --- /dev/null +++ b/linux-compat/home/.vimrc @@ -0,0 +1,131 @@ +"########## system ########### +set nocompatible +set ttyfast +set encoding=utf-8 +set mouse=a +set autoread +au FocusGained,BufEnter * silent! checktime +"############################# + +"######### generic ########### + +" status line +set showmode +set showcmd +set ruler + +" syntax hl +syntax enable +filetype on +filetype plugin on + +" lines +set number +set relativenumber +set numberwidth=3 +set wrap +set showmatch " brackets + +" search +set hlsearch +set incsearch +set ignorecase +set smartcase + +" tabs +set shiftwidth=4 +set tabstop=4 +set softtabstop=0 +set noexpandtab + +" scroll +set scrolloff=5 + +" commands +set wildmenu +set wildmode=list:longest,full +set gdefault + +"########################################### + +"############## file-specific ############### +autocmd FileType markdown setlocal spell +autocmd FileType gitcommit setlocal spell +autocmd FileType markdown setlocal complete+=kspell +autocmd FileType gitcommit setlocal complete+=kspell +"############################################ + +"####### remap - colemak-dh ####### + +" n -> h +noremap n h +noremap N H +noremap!

+" e -> k +noremap e k +noremap E K +noremap!

+" i -> j +noremap i j +noremap I J +noremap!

+" o -> l +noremap o l +noremap O L +noremap!

+ +" k -> n +noremap k n +noremap K N +noremap!

+" j -> e +noremap j e +noremap J E +noremap!

+" l -> i +noremap l i +noremap L I +noremap!

+" h -> o +noremap h o +noremap H O +noremap!

+noremap л т +noremap Л Т +noremap

+noremap д н +noremap Д Н +noremap

+noremap ж г +noremap Ж Г +noremap

+noremap т о +noremap Т О +noremap

+noremap г д +noremap Г Д +noremap

+noremap ь ж +noremap Ь Ж +noremap

+noremap н л +noremap Н Л +noremap

+"################################# + +"############# hacks ############# + +"################################ diff --git a/linux-compat/install-via-ssh.sh b/linux-compat/install-via-ssh.sh new file mode 100755 index 0000000..2f06bf5 --- /dev/null +++ b/linux-compat/install-via-ssh.sh @@ -0,0 +1,9 @@ +#!/bin/bash + +set -e +cd "$(dirname "$(readlink -f -- "$0")")" + +[[ -z "$1" ]] && echo "ERROR: no destination" >&1 && exit 1 + +scp -r home/. "$1:/tmp/workspace" +ssh "$1" "cp -rfT /tmp/workspace ~/ && rm -rf /tmp/workspace"